|
The JA-84P provides human body movement detection including visual alarm verification. The detector’s camera is equipped with a flash to take photos in the dark. A sequence of 4 photos is taken when movement is detected. The control panel has to be equipped with JA-80Q data module to support pictures transfer.
The camera is capable of taking monochromatic pictures with a resolution of 160x128 pixels. A sequence of 4 photos is taken when movement is detected. It is stored in the detector’s internal memory and it is also transmitted wirelessly to the control panel to be sent to an alarm receiving center and/or to the owner’s mobile phone display. The battery-powered detector communicates via the OASIS radio protocol
Specifications
Voltage: 2x Lithium battery type CR123 (3.0V)
Typical battery lifetime: approx. 3 years (max. 80 photo sequences)
Communication band: 868 MHz, Oasis protocol
Communication range: max. 300m (open area)
Recommended installation height: 2.0 to 2.5 m above floor level
PIR detection angle/detection range: 120° / 12 m (with basic lens)
Resolution of the camera 160 x 128 pixels, B&W
Internal memory photo format bit map (BMP)
Format of the photos transmitted to server JPG
Horizontal camera capture angle 50°
Range of the flash max. 3 meters
Typical photo transmission time to the control panel 12 sec
Typical photo transfer time from the system to server 8s / GPRS (JA-80Y)
Operational environment according to EN 50131-1 II. indoor general
Operational temperature range -10 to +40 °C
Dimensions 110 x 60 x 55 mm
Complies with ETSI EN 300220, EN 55022, EN 50130-4
|
